SBR BASED MULTIPURPOSE POLYMER FOR WATERPROOFING AND REPAIR DESCRIPTION SikaLatex® SBR is a synthetic rubber emulsion which when added to cement slurry / cement mortar / con-crete / grout provides good adhesion and water resist-ance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added directly to the gauging water of slurry / mortar / concrete / grout.
HIGH PERFORMANCE POLYMER MODIFIED CEMENTITIOUS COATING DescriptionDr. Fixit Fastflex is a two component acrylic cementitious coating system for waterproofing of wet areas andany water retaining structures such as swimming pools and water features. It provides strong bonding and excellent resistant to hydrostatic water pressure by forming highly elastic seamless coating over the applied concrete surfaces.
SikaTop® Seal-109 hi LIQUID APPLIED CRACK BRIDGING, 2 PACK ACRYLIC CEMENTITIOUS WATERPROOFING COATING SYSTEM DESCRIPTION SikaTop® Seal-109 hi is a liquid applied, crack bridging 2 pack acrylic polymer modified cementitious water- proofing coating system with moderate to high degree of elasticity depending on system buildup.
Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance.
Nitoflor Hardtop Standard Non metallic, monolithic surface hardening compound for fresh concrete floor Uses Nitoflor Hardtop Standard provide a highly abrasion resistant surface to concrete fl oors by the dry shake-on method which ensures that the hardwearing surface bonds monolithically to the base concrete. They are ideally suited for all industrial areas subject to the heaviest traffi c, e.g. loading bays, trucking lanes, car parks, workshops, machine shops, ramps and spillways.
SODIUM SILICATE BASED TRANSPARENT SURFACE HARDENER, DUST PROOFER, SEALING AND CURING COMPOUND FOR CONCRETE Sikafloor® CureHard-24 is a high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete.
Conbextra GP2 Free flow, high strength, non-shrink, cementitious precision grout Uses Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fi xings. These include masts, anchor bolts and fence posts.
POLYMER MODIFIED ONE COMPONENT REPAIR MORTAR FOR HAND AND MACHINE APPLICA-TION DESCRIPTION SikaTop®-122 HS is a pre-batched one component polymer modified repair mortar. USES Repair of spalling and damaged concrete in buildings ,bridges, infrastructure and superstructure works
Sika AnchorFix®-3030 EPOXY BASED HIGH PERFORMANCE CHEMICAL ANCHORING ADHESIVE DESCRIPTIONSika AnchorFix®-3030 is an epoxy resin based, 2-part, thixotropic, high performance anchoring adhesive for anchoring threaded rods and reinforcing bars in both cracked and un-cracked concrete dry or damp con-crete
SikaProof®-312 HDPE SG IN Pre-applied fully bonded HDPE self-adhesive membrane with protective sand layer for below ground waterproofing DESCRIPTION SikaProof®-312 HDPE SG IN is a unique HDPE based self adhesive fully bonded sheet membrane comprising of a virgin HDPE layer, coated with a high bond strength adhesive, covered by a weatherproof protective sand sprinkled layer, for below ground waterproofing of reinforced concrete structures. It is loose laid onto prepared substrates or formwork before fixing reinforcement and casting concrete. The adhesive layer is activated when the concrete is poured on the surface and forms a permanent bond with the fresh concrete which will prevent the ingress of water around the structure. Reinforcement can be directly laid on top of the membrane and it does not require screed protection.
Low viscosity and semi elastic epoxy resin DESCRIPTIONSikadur®-20 Crack Seal is a solvent-free, 2-component low viscosity and semi elastic liquid, based on epoxy resins. It is used especially for sealing of non-structural cracks and cavities in concrete.
Sikagard®-694 F (I) is a solvent free epoxy resin based putty like material. It has the special property that it is a moisture insensitive repair material
General Purpose Epoxy Bonding Agent - Bonding old and new cementitious substrates.
One component liquid cold applied polyurethane waterproofing membrane
Sika® SealTape F Crack-bridging waterproof sealing tape DESCRIPTIONSika® SealTape F is an elastic system component which is used in combination with Sika® waterproofing products. It reduces the risk of leaks through potential cracking locations at wall corners, floor-to-wall con-nections, pipe entries etc.
BITUMINOUS SEALING TAPE DESCRIPTION Sika® MultiSeal® is a self-adhesive, rubber modified bituminous sealing tape laminated with an aluminium foil on the upper side.
ELASTIC POLYURETHANE INJECTION RESIN FOR PERMANENT WATERTIGHT SEALING DESCRIPTION Sika® Injection-201 IN is a very low viscous, elastic and solvent-free polyurethane injection resin. In contact with water, a uniform, closed and therefore watertight pore structure forms, which is elastic and flexible.
Flexible water reactive closed cell polyurethane injection foam for stopping water leakage DESCRIPTIONSika® Injection-101 IN is a low viscous, fast foaming, two component polyurethane hydrophobic resin, which reacts with water to produce a flexible foam. It is suitable for stopping water leaks and waterproofing of cracks and joints in concrete.
ACRYLIC CEMENTITIOUS TWO COMPONENT WATERPROOF COATING Dr. Fixit Pidifin 2K is a acrylic cementitious, polymer modified elastomeric, waterproofing & protective coating composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates.
---Copy.jpeg)
.jpeg)
.jpeg)
